UA-78344104-1

Shears & Cutters

Sort By:
Show:
Display: List Grid
Carbon Steel 3-In-1 Bonsai Shear
This 3-In-1 shear is for easier styling work. The handle-loop curve gives more room for the fingers to give better power while not hurting your fingers. This shear comes with slim long reach for better pruning. The blade comes with wire cutting function for cutting wires upto 3mm thick. Last but not the least, the blade can cut branches up to 7mm.         ..
$45.95
Carbon Steel Ashinaga Shear - 8"
The Ashinaga Shear is a basic tool for thinning and defoliating bonsai. The Ashinaga Shear and the Concave Branch Cutter are generally considered to the two most basic bonsai tools. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiasts.     ..
$29.95
Carbon Steel Concave branch cutter - 8.1"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$57.95
Carbon Steel Concave Cutter with spring assist 8"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$49.95
Carbon Steel Knob Cutter - 11"
The Spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter a..
$77.95
Carbon Steel Knob Cutter - 7"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring. This knob cutter is smaller compared to RC-8S&nbs..
$49.95
Carbon Steel Knob Cutter with Spring Assist - 8"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring.   ..
$57.95
Carbon Steel Root Cutter - 10.6"
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance. ..
$79.95
Carbon Steel Trunk Splitter  - 10.6"
The Trunk Splitter is designed to split trunks with minimum residual damage. The shape of the head and the symmetrical cutting blades provide the clearance and cutting actions necessary to achieve clean splits.   ..
$79.95
Carbon Steel Trunk Splitter - 8"
The Trunk Splitter is designed to split trunks with minimum residual damage. The shape of the head and the symmetrical cutting blades provide the clearance and cutting actions necessary to achieve clean splits.     ..
$59.95
Giant Carbon Steel Concave Branch Cutters - 11"
This is a relatively large sized concave cutter and are ideal for working on large trees. Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute.     ..
$77.95
Giant Stainless Steel Concave Cutter - 11"
This is a relatively large sized concave cutter and are ideal for working on large trees. Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$97.95
Kiri Hasami Shear - 8"
The Kiri Hasami Shear is similar to the Satsuki, but has a narrower body and a little more length. It is excellent for trimming inside dense foliage. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiasts.     ..
$29.95
NEW 10.5" Carbon Steel Root Cutter (CR270)
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance. Dimensions: 10.5 X 2.5 X 1/2 inches  ..
$49.99 $62.59
NEW 10.5" Carbon Steel Trunk Splitter (CB270)
The Trunk Splitter is designed to split trunks with minimum residual damage. The shape of the head and the symmetrical cutting blades provide the clearance and cutting actions necessary to achieve clean splits.     ..
$59.99 $74.99
NEW 11" Carbon Steel Concave Cutter (CC270)
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute.   ..
$69.99 $87.59
NEW 11.5" Carbon Steel Knob Cutter (CSQ280)
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring. Dimensions: 11.5 X 2 X 1 inches  ..
$44.99 $56.29
NEW 14" Carbon Steel Trunk Splitter (CB360)
The Trunk Splitter is designed to split trunks with minimum residual damage. The shape of the head and the symmetrical cutting blades provide the clearance and cutting actions necessary to achieve clean splits.   Dimensions: 14 X 3 X 1 inches ..
$79.99 $100.00
NEW 6.5" Carbon Steel Concave Cutter (CC175)
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. Dimensions: 7 X 1.5 X 1 inches  ..
$10.69 $13.75
NEW 6.5" Carbon Steel Knob Cutter (CSQ175)
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring. Dimensions: 6.5 X 1.5 X 1 ..
$10.39 $12.99
NEW 8" Carbon Steel Concave Cutter (CC200)
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. Dimensions: 8 X 2 X 1/2 inches  ..
$14.39 $17.99
NEW 8" Carbon Steel Knob Cutter (CSQ210)
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring. Dimensions: 8 X 2 X 1 inches  ..
$14.39 $17.99
NEW 8" Carbon Steel Root Cutter (CR210)
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance. Dimensions: 8 X 2 X 1 inches  ..
$15.39 $19.25
NEW 8" Carbon Steel Shear (CS210)
This shear is a traditional style tool which is useful as a combination garden, flower, Ikebana or Bonsai shear. It is the best type of shear for cutting capillary roots, and its' stout blades are excellent for light branch cutting and general Bonsai trimming. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiasts. ..
$14.49 $18.19
NEW 8" Carbon Steel Trunk Splitter (CB200)
The Trunk Splitter is designed to split trunks with minimum residual damage. The shape of the head and the symmetrical cutting blades provide the clearance and cutting actions necessary to achieve clean splits.   Dimensions: 8 X 2 X 1/2 inches  ..
$14.99 $18.75
NEW 8.5" Carbon Steel Concave Cutter (CC210)
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. Dimensions: 8.5" X 2“ X 1”  ..
$15.59 $19.48
NEW 8.5" Stainless-Steel Root Cutter  (SR210)
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance.   Dimensions: 8.5 X 2 X 1 inches   ..
$19.99 $25.99
Ohkubo Hasami Shear (small) - 6.3"
The Ohkubo Hasami Shear is a traditional style tool which is useful as a combination garden, flower, Ikebana or Bonsai shear. It is the best type of shear for cutting capillary roots, and its' stout blades are excellent for light branch cutting and general Bonsai trimming. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiasts. ..
$24.95
Ohkubo Hasami Shear - 7.5"
The Ohkubo Hasami Shear is a traditional style tool which is useful as a combination garden, flower, Ikebana or Bonsai shear. It is the best type of shear for cutting capillary roots, and its' stout blades are excellent for light branch cutting and general Bonsai trimming. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthus..
$29.95
Satsuki Hasami Shear - 7.1"
The Satsuki Hasami shear has a long, narrow body and is a fine shear for trimming buds and reaching deep with minimum disturbance to surrounding foliage. It also has finger rings well suited for smaller hands. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiasts.     ..
$29.95
Small Carbon Steel Branch Cutter - Spherical 7.1"
This is a smaller size concave cutter, it is ideal for working on small to medium size trees and are particularly well suited for smaller hands. Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute.     ..
$54.95
Small Carbon Steel Concave Branch Cutter - Standard 6.7"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. This is a smaller size concave cutter, it is ideal for working on small to medium size trees and are particularly well suited for smaller hands.   ..
$47.95
Stainless Steel knob cutter - 11"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter a..
$97.95
Stainless-Steel 3-In-1 Bonsai Shear
This stainless-steel 3-In-1 shear is for easier styling work. The handle-loop curve gives more room for the fingers to give better power while not hurting your fingers. This shear comes with slim long reach for better pruning. The blade comes with wire cutting function for cutting wires upto 3mm thick. Last but not the least, the blade can cut branches up to 7mm. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all c..
$65.95
Stainless-Steel Ashinaga Shear - 8"
The Ashinaga Shear is a basic tool for thinning and defoliating bonsai. The Ashinaga Shear and the Concave Branch Cutter are generally considered to the two most basic bonsai tools. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiasts. ..
$57.95
Stainless-steel Concave Branch Cutter - Spherical 7.1"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute.   ..
$74.95
Stainless-Steel Concave Branch Cutter - Spherical 8.1"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$89.95
Based on 1 reviews.
Stainless-Steel Concave Branch Cutter with Spring Assist - Standard 8"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$84.95
Stainless-Steel Concave Branch Cutter- Standard 6.5"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute.     ..
$69.95
Stainless-Steel Kiri Hasami Shear - 8"
The Kiri Hasami Shear is similar to the Satsuki, but has a narrower body and a little more length. It is excellent for trimming inside dense foliage. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred&n..
$57.95
Stainless-steel Knob Cutter - Spherical 7"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring.   ..
$74.95
Stainless-Steel Knob Cutter with Spring Assist - Spherical  8"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring.   ..
$84.95
Stainless-Steel Ohkubo Hasami Shear (small) - 6.3"
The Ohkubo Hasami Shear is a traditional style tool which is useful as a combination garden, flower, Ikebana or Bonsai shear. It is the best type of shear for cutting capillary roots, and its' stout blades are excellent for light branch cutting and general Bonsai trimming. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiast..
$37.95
Stainless-Steel Ohkubo Hasami Shear - 8"
The Ohkubo Hasami Shear is a traditional style tool which is useful as a combination garden, flower, Ikebana or bonsai shear. It is the best type of shear for cutting capillary roots, and its' stout blades are excellent for light branch cutting and general Bonsai trimming. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiast..
$57.95
Stainless-Steel Root Cutter - 10.6"
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance.   ..
$97.95
Stainless-Steel Root Cutter - 8.3"
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance.     ..
$69.95
Stainless-Steel Satsuki Hasami Shear - 7"
The Satsuki Hasami shear has a long, narrow body and is a fine shear for trimming buds and reaching deep with minimum disturbance to surrounding foliage. It also has finger rings well suited for smaller hands. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean&..
$54.95
Stainless-Steel Trunk Splitter - 8"
The Trunk Splitter is designed to split trunks with minimum residual damage. The shape of the head and the symmetrical cutting blades provide the clearance and cutting actions necessary to achieve clean splits.     ..
$77.95