UA-78344104-1

Stainless-Steel Tools

Sort By:
Show:
Display: List Grid
Giant Stainless Steel Concave Cutter - 11"
This is a relatively large sized concave cutter and are ideal for working on large trees. Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$97.95
NEW 8.5" Stainless-Steel Root Cutter  (SR210)
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance.   Dimensions: 8.5 X 2 X 1 inches   ..
$19.99 $25.99
Stainless Steel knob cutter - 11"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter a..
$97.95
Stainless-Steel 3 Prong Root Rake/Tweezer - 8.7"
Root rakes are convenient for working the soil during transplanting, but also work well for general care of your bonsai. The rake is used to gently remove soil from around the roots and to stir up the soil. The symmetrical spatulas are well suited for tamping soil around the base of your bonsai and the tweezers are used to remove dead leaves, insects, needles and other fine debris from around the base of your bonsai.   ..
$9.95
Stainless-Steel 3-In-1 Bonsai Shear
This stainless-steel 3-In-1 shear is for easier styling work. The handle-loop curve gives more room for the fingers to give better power while not hurting your fingers. This shear comes with slim long reach for better pruning. The blade comes with wire cutting function for cutting wires upto 3mm thick. Last but not the least, the blade can cut branches up to 7mm. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all c..
$65.95
Stainless-Steel 3-Prong Root Rake/Spatula - 10"
Root rakes are convenient for working the soil during transplanting, but also work well for general care of your bonsai. The rake is used to gently remove soil from around the roots and to stir up the soil. The symmetrical spatulas are well suited for tamping soil around the base of your bonsai and the tweezers are used to remove dead leaves, insects, needles and other fine debris from around the base of your bonsai. ..
$9.95
Stainless-Steel Ashinaga Shear - 8"
The Ashinaga Shear is a basic tool for thinning and defoliating bonsai. The Ashinaga Shear and the Concave Branch Cutter are generally considered to the two most basic bonsai tools. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiasts. ..
$57.95
Stainless-steel Concave Branch Cutter - Spherical 7.1"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute.   ..
$74.95
Stainless-Steel Concave Branch Cutter - Spherical 8.1"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$89.95
Based on 1 reviews.
Stainless-Steel Concave Branch Cutter with Spring Assist - Standard 8"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute. ..
$84.95
Stainless-Steel Concave Branch Cutter- Standard 6.5"
Concave branch cutters are razor sharp tools designed for cutting branches flush to the truck. The resulting wound can be then heal quickly with little scarring. The concave cutter is the single most important tool for bonsai shaping for which there is no substitute.     ..
$69.95
Stainless-Steel Kiri Hasami Shear - 8"
The Kiri Hasami Shear is similar to the Satsuki, but has a narrower body and a little more length. It is excellent for trimming inside dense foliage. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred&n..
$57.95
Stainless-steel Knob Cutter - Spherical 7"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring.   ..
$74.95
Stainless-Steel Knob Cutter with Spring Assist - Spherical  8"
The spherical knob cutter are designed for removing trunk knobs and roots. The head spherically shaped like a ball. These cutters produce a hollow circular cut that heals quickly with minimal scarring. Compared to standard concave cutters the cutting edges of the knob cutter are rounded. The results are spherical cuts which are round and hollow and heal with the most aesthetic and least visible scarring.   ..
$84.95
Stainless-Steel Ohkubo Hasami Shear (small) - 6.3"
The Ohkubo Hasami Shear is a traditional style tool which is useful as a combination garden, flower, Ikebana or Bonsai shear. It is the best type of shear for cutting capillary roots, and its' stout blades are excellent for light branch cutting and general Bonsai trimming. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiast..
$37.95
Stainless-Steel Ohkubo Hasami Shear - 8"
The Ohkubo Hasami Shear is a traditional style tool which is useful as a combination garden, flower, Ikebana or bonsai shear. It is the best type of shear for cutting capillary roots, and its' stout blades are excellent for light branch cutting and general Bonsai trimming. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean close cuts and are preferred by most serious bonsai enthusiast..
$57.95
Stainless-Steel Root Cutter - 10.6"
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance.   ..
$97.95
Stainless-Steel Root Cutter - 8.3"
The root cutters are specifically designed for cutting and pruning roots during transplanting and re-potting. Unlike knob cutters, which have spherically contoured heads, the wide cutting blades of the root cutter are straight. The blades are much stronger for cutting denser wood fibers usually found in roots. The head is contoured to provide added clearance.     ..
$69.95
Stainless-Steel Satsuki Hasami Shear - 7"
The Satsuki Hasami shear has a long, narrow body and is a fine shear for trimming buds and reaching deep with minimum disturbance to surrounding foliage. It also has finger rings well suited for smaller hands. Trimming shears are the most commonly and widely used tool for all bonsai work and quality shears are always required in all cases. Bonsai shears make clean&..
$54.95
Stainless-Steel Trunk Splitter - 8"
The Trunk Splitter is designed to split trunks with minimum residual damage. The shape of the head and the symmetrical cutting blades provide the clearance and cutting actions necessary to achieve clean splits.     ..
$77.95
Stainless-Steel Tweezer/Spatula - 8.3"
Root rakes are convenient for working the soil during transplanting, but also work well for general care of your bonsai. The rake is used to gently remove soil from around the roots and to stir up the soil. The symmetrical spatulas are well suited for tamping soil around the base of your bonsai and the tweezers are used to remove dead leaves, insects, needles and other fine debris from around the base of your bonsai.     ..
$9.95
Stainless-Steel Wire Cutters - 6.3"
Wire Cutters are designed specifically for bonsai Wire. Although enthusiasts new to bonsai sometimes substitute regular wire cutters for economy, these wire cutters are designed with a rounded head to prevent damaging the branch and with jaws that cut the wire symmetrically and cleanly. Highly recommended for the more serious enthusiast.   Size suitable for smaller hands.     ..
$29.95
Stainless-Steel Wire Cutters - 7"
Wire Cutters are designed specifically for bonsai Wire. Although enthusiasts new to bonsai sometimes substitute regular wire cutters for economy, these wire cutters are designed with a rounded head to prevent damaging the branch and with jaws that cut the wire symmetrically and cleanly. Highly recommended for the more serious enthusiast.   Size suitable for smaller hands.     ..
$69.95
Stainless-Steel Wire Cutters - 8"
Wire Cutters are designed specifically for bonsai Wire. Although enthusiasts new to bonsai sometimes substitute regular wire cutters for economy, these wire cutters are designed with a rounded head to prevent damaging the branch and with jaws that cut the wire symmetrically and cleanly. Highly recommended for the more serious enthusiast.       ..
$74.95
Stainless-Steel Wire Pliers - 8"
Known in Japan as 'Yattoko' pliers, are designed specifically for manipulating bonsai wire when applying and removing the wire from trunks and branches.     ..
$59.95